M&MRefrigeration, Inc.

Software Features

M&M PC Monitor
The entire M&M control system product line supports the addition of our Windows-based PC Monitor software package. PC Monitor facilitates remote or on-site monitoring and modification of M&M control system products. From any location, an operator can observe and modify current operating setpoints and retrieve valuable system information to a computer. The PC Monitor software can be configured to support any combination of the following features:

PC Software Features
All software is Microsoft Windows based comparable with Windows 98 or higher releases. Anything that the operator can do at the keypad of the microprocessor can be done from the PC. The same screens can be seen and all setpoints can be changed.

Standard PC Software Features

Color Graphic Display
Screens show real-time animated movement of screw and piston compressors along with all other refrigeration components. Red indicates that the piece of equipment is turned off. White indicates the piece of equipment is on. Compressors, fans, pumps, etc. are in motion when white and running. Color code is used to determine different temperature piping within the system. Digital readouts of all key sensor points are displayed on each screen (see Figure 2 & 3.)

You can select equipment such as an air unit and go directly to its status screen. You can also select a screw compressor and see the package fully animated (see Figure 4.) You can also select other screens such as a plant floor plan or specific equipment such as a spiral freezer (see Figure 5 - 7.)

All alarms or failures are shown on these screens by color (yellow-alarm, red-fail) and they will be flashing.

Figure 2  ·  Figure 3  ·  Figure 4  ·  Figure 5  ·  Figure 6  ·  Figure 7